产品资料

日新泵

如果您对该产品感兴趣的话,可以
产品名称: 日新泵
产品型号: SCP25-180-15CC
产品展商: NISSIN日新
产品文档: 无相关文档

简单介绍

日新泵是采用国际先进技术,专业生产制造不锈钢高级卫生级和无菌级离心泵,自吸泵及转子泵的著名企业.日新泵引进最先进的专业加工设备,拥有中国第一套全自动卫生级泵的测试系统,严格根据欧洲EHEDG.美国营商业3A和国际GMP等标准制造卫生泵,日新泵广泛用于食品饮料,乳品,啤酒酿造,生物工程,医药及精细化工等行业,拥有可口可乐,百事可乐,伊利乳业,金威啤酒,健力宝,娃哈哈,汇源果汁,燕京啤酒等著名客户。


日新泵  的详细介绍

日新简介NISSIN PROFILE

 
日新流休设备是采用国际先进技术,引进品牌和资本建立的专业生产制造不锈钢高级卫生级和无菌级离心泵,自吸泵及转子泵的著名企业.
 
日新公司引进最先进的专业加工设备,拥有中国第一套全自动卫生级泵的测试系统,严格根据欧洲EHEDG.美国营商业3A和国际GMP等标准制造卫生泵,拥有功率从1.1KW~45KW等一百多等规格型号的产品.
 
日新泵广泛用于食品饮料,乳品,啤酒酿造,生物工程,医药及精细化工等行业.产品以NISSIN品牌或者OEM出口到世界近30个国家,拥有可口可乐,百事可乐,伊利乳业,金威啤酒,健力宝,娃哈哈,汇源果汁,燕京啤酒等著名客户.
Nissin was established on the basis of foreign advanced technology, brand and capital. Nissin is a famous and professional enterprise, specialized in producing stainless steel superior sanitary and aseptic centrifugal pumps, liquid-ring pumps and lobe pumps.
 
Nissin owns the most advanced professional manufacturing equipments and the first one set of fully-automatically sanitary pump testing system in China. Nissin produce sanitary pumps strictly according with Europe standard EHEDG, America Standard 3A, and China standard GMP, etc. Nissin has more than 100 models of pumps; the ranges of power are from 1.1Kw to 45Kw.
 
Nissin pumps are widely used in the industries of Food, Beverage, Brewery, Biochemical engineering, Pharmaceutical, Fine Chemical, etc. Pumps are made in the brand of Nissin or in the way of OEM to export to nearly 30 countries in the world. Nissin’s customers include: Pepsi-cola, CoCa-cola, Yili Dairy, Kingway Brewery, Wahaha, Huiyuan Fruit Juice, Yanjing Beer, etc.
 
应用:
日新卫生型离心泵可广泛适用于各类液体物料的输送.如乳品,啤酒,饮料,医药,生物工程,精细化工等领域.它不但可以输送普通的低,中粘度溶液,也可以输送含悬浮物或有腐蚀性的溶液.日新卫生型离心泵的形式工业基础单级,单级,开式叶轮.泵壳,叶轮经精心设计,减小了阻力,彻底消灭了卫生死角.由于其特殊的结构,所以提高了泵内液体的流速,从而提高了泵的整体性能,且易于清洗,具有卓越的卫生性能.它可以满足产品对卫生,柔性处理的要求并具有耐化学腐蚀性能.
标准设计:
SCP泵由以下部分组成:标准的马达,叶轮,泵壳,卫生机械密封.它具有专为就地清洗系统(CIP)设计的内部无死角和可清洗的密封.SCP泵有一个不锈钢的外罩可保护马达,还有四个可调节的不锈钢支脚.
轴封:
SCP泵装有一个平衡型单端面机械密封或一个可冲洗的平衡型单端面机械密封.这两种机械密封的静环由AISI316L钢内嵌碳化硅或石墨构成,动环则由碳化硅制成.可冲洗机械密封的辅助密封是一个经久耐用的唇形密封.SCP10B~SCP25B型泵的机械密封为双端面机械密封.
Application
Nissin sanitary pump is applicable in conveying all kinds of liquid material in the industries of Dairy, Beer, Beverage pharmaceutical and chemistry .it conveys not only normal low or middle viscous solutions but also suspension and corrosive fluids .nissin sanitary centrifugal pump has types of single state, single suction and open styled impeller. with its elaborate design in shell and impeller, resistance is reduced and unhygienic dead angle is thoroughly eliminated, due to its special structure, the liquid flow speed in the pump is promoted to its whole performance, also it has an easy access for cleaning which presents its outstanding sanitary features, it meets the product gentle treatment requirements as well as anti-chemical-chemical-corrosive character
 
Standard design
the SCP pump consist of a standard motor, impeller, pump casing and sanitary mechanical shaft seal, the SCP pump is designed for CIP with emphasis on large internal rounding and cleanable seals, SCP has a stainless steel shroud for protection of the motor ,and the complete unit is supported on four adjustable stainless steels.
 
Shaft seal
The SCP pump is equipped with either an single or a flushed shaft seal, both have stationary seal rings in acid resistant steel AISI316L with sealing surface in carbon or carbide and rotating seal rings in silicon carbide. the secondary seal of the flushed seal is a long lasting lip seal.SCP10B to 25Bbmay also be equipped with a double mechanical shaft seal.
 
 

 
材质:                       
过液部分材质:      AISI316L不锈钢
其它部分材质:      AISI304不锈钢
外表面:            钛色
内表面:            抛光
过液密封材料:      EPDM乙丙橡胶
技术参数:
最大入口压力:      0.5MPa
温度范围:         -10到140(EPDM)
噪声水平(1处) 小于85dB(A)
可冲洗密封:
水压:             最高0.1 MPa
水量:             0.25-0.5L/min
双端面密封:
水压:         最高0.6 MPa
水量:         0.25-0.5L/min
电压和频率:   3-,50HZ,220~240V/380~420V/660~690V, ⊿/Y
电机型号:     50HZ:1.5,2.2,3,4,5.5,7.5,11,15KW
 
Materials
Product wetted steel parts: acid resistant steel AISI 316L
Other steel parts:        stainless steel aisi304
Outside surface:          Ti
Inside surface:        bright
Product wetted seals: EPDM rubber
Technical date
Max. Inlet pressure:   0.5MPa
Temperature range:     -10to+140(EPDM)
Noise level (at 1m)    <85dB (A)
Flushed seal
Water pressure:       max.0.1 MPa
Water consumption:   0.25-0.5l/min
Double mechanical seal:
Water pressure:       max.0.6 MPa
Water consumption:    0.25-0.5l/min
Voltage and frequency:3-,50HZ,220~240V/380~420V/660~690V, ⊿/Y
Motor sixes:          50HZ: 1.5, 2.2, 3, 4, 5.5, 7.5, 11,15KW
 
卫生型离心泵介绍:
 
配用电机:
1电机按照国际标准设计制造
 国际电工委员会IEC34,IEC72
 英国标准BS4999-5000
 澳大利亚标准AS1359-2
 德国DIN42673
 符合欧共体”CE”标记要求
2电机符合下列标准
 GB755-87
 GB10069-88.
 Q/JBQS28-2000
3合理的结构设计
 灵活的引出线方向
4优越的电气性能
 低躁音,低振动
 高性能的防护等级
 电机的标准设计防护等级为IP55,可按用户要求提供更高要求的防护等级
 适用双频率,宽电压使用
 电机设计考虑了不同地区的电压变化,使电机适应多个地区电压使用,并保证用户使用性能.
 提高绝缘等级,增加电机使用寿命.
Motors
1. These motors are built to comply with current
 International standards international
 Electro technical Commission IEC 34 and IEC72
 British standard BS5000 and BS 4999
 Australian standard ASI3592
 German standard DIN 42673
 EU directives to fulfill European
2these motors are built comply with current national standards
 GB755-87
 GB10069-88.
 Q/JBQS28-2000
3. Mechanical design
 Terminal boxes
4. Electrical design
 Minimum noise and vibration levels
 Maximum degrees of protection
 All motors are protected to IP 55 as a minimum. Higher levels of protection are available on request.
 Service and operating conditions
 Motors are designed to be insensitive to wide supply voltage fluctuations
 Class f insulation offers greater reliability and security.
 
 
 
 
 
卫生型自吸泵介绍
应用:
SLRP系列泵是特别设计用来处理含有一部分气体的流体物料.此类泵可广泛用于食品,化工,制药及类似要求的应用场合,特别是在(CIP)就地清洗系统中用作回流泵.
标准设计:
卫生机械密封
机械密封的静环由AISI316L钢内嵌石墨构成,动环则由碳化硅制成.SLRP泵有一个不锈钢的外罩保护马达,还有四个可调节的不锈钢支脚.
 
Application
The SLRP pump is liquid ring pump which is specially designed for pumping liquids containing air or gas. The pump is used in food, chemical, pharmaceutical and similar .the pump can be used for CIP return.
Standard design
Sanitary single seal with stationary seal ring of acid resistant steel AISI 316L with sealing surface
in carbon and rotating of silicon carbide. The pump has a stainless steel shroud for protection of the motor, and the complete unit is supported on four adjustable stainless steel legs
 
材质:
所有过液部件,泵壳,泵盖和叶轮均由AILI316L不锈钢制造.
过液部分材质: AISI316L不锈钢
其它部分材质: AISI304不锈钢
外表面:钛色
内表面:抛光0.4
过液密封材料:EPDM乙丙橡胶
Materials
All product wetted parts, pump casing, casing cover and impeller are made of acid resistant steel AISI 316L Motor shroud is made of stainless steel AISI 304 seals are made of EPDM rubber
Product wetted steel parts: Acid resistant steel AISI 316L
Other steel parts: stainless steel AISI304
Outside surface: TI
Inside surface: bright0.4
Product wetted seals: EPDM rubber
 
技术参数:
最大入口压力:     0.5 MPa
温度范围:         -10到+140(EPDM)
噪声水平(1处) 小于85dB(A)
电压和频率:   3-,50HZ,220~240V/380~420V/660~690V, ⊿/Y
电机型号:     50HZ: 4,5.5,7.5KW
Technical data
Max. Inlet pressure:      0.5 MPa
Temperature range:         -10to+140(EPDM)
Noise level (at 1 m)     <85dB (A)
Voltage and frequency:   3-,50HZ,220240V/380~420V/660~690V, ⊿/Y
Motor sixes:             50HZ: 4, 5.5, 7.5KW
 
 
 
配用电机:
1电机按照国际标准设计制造
 国际电工委员会IEC34,IEC72
 英国标准BS4999-5000
 澳大利亚标准AS1359-2
 德国标准DIN42673
 符合欧共休”CE”标记要求
2电机符合下列标准
GB755-87     GB10069-88     Q/JBQS28-2000
3合理的结构设计:灵活的引出线方向
4优越的电器性能
 低噪音,低振动,高性能的防护等级
 电机的标准设计防护等级为IP55,可按用户要求提供更高要求的防护等级.
 适用双频率,宽电压使用
 电机设计考虑了不同地区的电压变化,使电机适应多个地区电压使用,并保证用户使用寿命.
Motors
1. These motors are built to comply with current international
 Standards international Electro technical
 Commission EC34and IEc72
 British standard BS5000 and BS 4999
 Australian standard AS13592-2
 German standard DIN42673
 EU directives to fulfill European “CE” Marking
2 these motors are built to comply current national standards
 GB755-87     GB10069-88     Q/JBQS28-2000
3 Mechanical Design: Terminal boxes
4 Electrical Designs
 Minimum noise and vibration levels
 Maximum Degrees of protection
 All motors are protected to IP 55as a minimum.
 Higher levels of protection are available on request.
 Service and Operating conditions
 Motors are designed to be insensitive to wide supply voltage fluctuations
 Class F insulation offers greater reliability and security
 
 
卫生型转子泵介绍
应用:
SLP系列卫生型转子泵适用于有严格卫生要求的食品,调味品,乳制品,制药等相关行业.转子泵的设计是基于无接触的两凸轮的同步转动,以适应输送稀的或粘稠物料,甚至是含有固体的悬浮物料.坚固的齿轮箱和短轴保证最小的偏差,在没有前轴套的条件下可以在高压(22bars)下工作
易维护
SLP系列卫生型转子泵的密封件和密封座在不用拆卸管道的条件下,通过拆卸泵头的前盖就可以更换或拆除.能够进行CIP在线就地清洗.
轴封:
SLP系列卫生型转子泵的轴封采用机械密封,唇型密封或O型圈密封,有单密封和带水冲洗两种.
转子
为了得到最高的效率,最小的内部滑动和更长的使用寿命,转子的几何形状是经经过广泛的研究,使用三维CAD设计完成.转子的卫生性能设计是通过前端一个O型圈和联结轴套处一个O型圈来防止工作流体进入轴的花键.
Application
The sanitary lobe pumps SLP, has been designed specially for the Food, Dairy, Pharmaceutical and related industries, for which, comply with the most stringent hygiene requirements. The pumping system based on synchronous operation of the lobed without contacting each other, make it a suitable pump for thin or viscous products, even with solids in suspension, The sturdiness of the gearbox and the short shafts resistant to deflection, allow to work at high pressure(22bars)without need of support front bushings.
Easy maintenance
Seals and seal casing (cartridge) in the SLP pump can be changed and dismantled front the front part of the pump without disconnecting it of the pipelines, cleaning can be affected in place (CIP).
Shaft sealing
The shaft sealing in the SLP pump it can be by mechanical seal. Lip seal or o-ring seal. These arrangements can also be supplied either with or without flushing.
Rotors
In order to get maximum efficiency, minimum internal slip and longer service life, the rotors geometry has been determined after a wide studied, using dimensional cad technology. Rotors are of sanitary design; provided with o-ring (head) and the shaft sleeve o-ring avoid the process liquid get to the shaft splints.
 
安全阀
Safety relief valve
调整安全阀的压力,当超压安全阀打开释放压力
Adjustable pressure relief valve act a by-pass of overpressure.
性能参数/performances
最大流量:160m3/h          flow up 160m3/h
最大压力:22bars            Max. Pressure 22bars
最高温度:180             Max.temperature180℃
 
主要特点/advantages
无需从管线上拆下就可以                     Easy maintenance without
维修保护;                                   removing pipelines
结构紧凑;                                   Compact construction
转子间无摩擦;                               no friction between rotors
有几种转子供选择;                           several rotor option
低噪音;                                     Low noise lever
降低维修费用;                               reduced maintenance cost
高效率;                                     high efficiency
可反转;                                     reversible
安全阀(供选择);                              safety relief valve (optional)
进出口联结形式:DIN ,SMS,CLAMP.ISO等.       Several connection options DIN, SMS,
Clamp, ISO等                                 Clamp, ISO
 
适用范围/applications
适用于调味品,饮料,啤酒,果汁,奶制品,制药,糖制品,食用油,肉制品,化妆品,洗涤剂等粘稠或稀释液体的输送.
Condiment, Beverage, Beer, Juices, Dairy, Pharmaceutical, Confectionery, Edible, Oils, Meat pastes, Cosmetics, detergents etc.
 
材料/materials
所有与物料接触部件为316L不锈钢;
泵轴采用高强度不锈钢;
O型圈为食用级丁睛橡胶(perbunan),硅橡胶(silicon),三元乙丙(EODM),氟橡胶(VITON),聚四氟乙稀(PTFE);标准机械密封采用石墨一碳化硅
All parts in touch with the product are made of stainless 316L
The pump shafts are high rigidity stainless
O-rings are Food quality Perbuman (NBR), silicon (VMQ), EPDM, VITON (FPM), PTFE
Normal mechanical seals are carbon-sic。
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!