产品资料

iCP 阿法拉伐泵 alfalaval卫生泵

如果您对该产品感兴趣的话,可以
产品名称: iCP 阿法拉伐泵 alfalaval卫生泵
产品型号: SOLIDCL-2
产品展商: ALFALAVAL阿法拉伐
产品文档: 无相关文档

简单介绍

iCP 阿法拉伐泵 alfalaval卫生泵 是一款针对较低应用要求的极具竞争力的解决方案,同时也是标准液体、公用设施和CIP应用的理想之选。该款离心泵坚守阿法拉伐一贯的质量承诺,确保可靠、安全的生产,且易于维护。 i-CP100离心泵在设计上秉持卫生理念,符合EHEDG要求,自带橡胶部件均符合FDA要求。 最高流速:85立方米/小时 最大入口压力:400 kPa。


iCP 阿法拉伐泵 alfalaval卫生泵  的详细介绍

商品详细介绍

alfalaval阿法拉伐卫生泵,LCP iCP 阿法拉伐泵 alfalaval卫生泵

离心泵




 

离心泵i-CP100

阿法拉伐 i-CP100离心泵是一款针对较低应用要求的极具竞争力的解决方案,同时也是标准液体、公用设施和CIP应用的理想之选。该款离心泵坚守阿法拉伐一贯的质量承诺,确保可靠、安全的生产,且易于维护。

 i-CP100离心泵在设计上秉持卫生理念,符合EHEDG要求,自带橡胶部件均符合FDA要求。

  • 最高流速:85立方米/小时
  • 最大入口压力:400 kPa(4巴)
  • 接触液体部件的材质:不锈钢1.4403(304L) alfalaval阿法拉伐卫生泵,LCP iCP 阿法拉伐泵 alfalaval卫生泵

iCP 阿法拉伐泵 alfalaval卫生泵 采用同一尺寸的机械密封,与LKH 单端面机封一致。
SolidC标准工况卫生离心泵:

标准设计:
 

SolidC泵适用于标准负载应用领域,适用CIP(原位清洗)解决方案、公用事业、水(处理、加热、冷却)、洗衣机、工作范围内的流体输送等。
SolidC适用在食品、奶制品、饮料、个人护理用品、制药、精细化工和水工业使用。
标准设计:
SolidC泵由标准电机、短轴、机械式压紧联轴节、接头、支承板、叶轮、泵盖和轴封组成。alfalaval阿法拉伐卫生泵,LCP iCP 阿法拉伐泵 alfalaval卫生泵

 
 
SolidC 性能
限于已经验证的应用领域:奶制品、CIP供水和葡萄酒。
SolidCL Pump
Applications
The SolidCL pump is designed for standard duty applications, like
pumping CIP (Cleaning In Place) solutions, utilities, water (processing,
heating, cooling), washing machines, simple transport duty within
working range. SolidCL is suited for use in the food, dairy, beverage
and water industries.
Standard design
The SolidCL pump consists of a standard motor, stub shaft,
mechanical compression coupling, adaptor, back plate, impeller, pump
casing and shaft seal.
The SolidCL pump is designed for CIP with emphasis on large internal
roundings and cleanable seals.
SolidCL has a stainless steel shroud for protection of the motor, and
the complete unit is supported on four adjustable legs.
Shaft seals
The SolidCL pump is equipped with either an external single or a
flushed shaft seal. Both have stationary seal rings in acid-resistant steel
AISI 329 with sealing surface in silicon carbide and rotating seal rings in
carbon. The secondary seal of the flushed seal is a long lasting lip seal.
Materials
Productwetted steel parts: . . . . . . . . .Acid-resistant steel 1.4403
(304L).
Other steel parts: . . . . . . . . . . . . . . .Stainless steel 1.4301 (304).
Finish: . . . . . . . . . . . . . . . . . . . . . .Blasted (standard)
3A polishing (Ra 0.8).
Productwetted seals: . . . . . . . . . . . .EPDMrubber (acc. to FDA).
Technical data
Max. inlet pressure: . . . . . . . . . . . . .400 kPa (4 bar).
Temperature range: . . . . . . . . . . . . . .-10°C to +120°C (EPDM).
Flushed shaft seal (FSS):
Water pressure inlet: . . . . . . . . . . . . .max. 100 kpa (1 bar).
Water consumption: . . . . . . . . . . . . .0.25 -0.5 l/min.
Connections for FSS:
R 1/8" (BSP) external thread.
Motor
Foot-flanged motor according to the IEC metric standard (EFF II), 2
poles = 3000/3600 rpm. at 50/60 Hz, IP 55 (with drain hole with
labyrinth plug), insulation class F.
Voltage and frequency
3 ~, 50 Hz, 220-240V Δ/380-420VY ≤ 4 kW
3 ~, 60 Hz, 250-280V Δ/440-480VY ≤ 4.6 kW
3 ~, 50 Hz, 380-420V Δ/660-690VY ≥ 5.5 kW
3 ~, 60 Hz, 440-480V Δ ≥ 6.4 kW
Motor sizes
50 Hz: 1.1, 1.5, 2.2, 3, 4, 5.5, 7.5, 11, 15, 18.5 kW
60 Hz: 1.3, 1.75, 2.5, 3.5, 4.6, 6.4, 8.6, 12.5, 17, 21 kW.
Warranty
Extended 3-years warranty on the SolidCL Centrifugal Pump range.
The warranty covers all non wear parts on the condition that genuine
Alfa Laval Spare Parts are used.
OC TOB E R 2008
Options
A. Impeller with reduced diameter.
B. Motor for other voltage and/or frequency.
C. 1500 rpm. motor.
D. Flushed shaft seal.
E. Product wetted seals of Nitrile (NBR), Fluorinated rubber (FPM)
or FEP.
F. Rotating seal ring of Silicon Carbide.
Ordering
Please state the following when ordering:
- Pumpsize.
- Connections.
- Impeller diameter.
- Motor size.
- Voltage and frequency.
- Flow, pressure and temperature.
- Density and viscosity of the product.
- Options.
Note!alfalaval阿法拉伐卫生泵,LCP iCP 阿法拉伐泵 alfalaval卫生泵
For further details, see also ESE00232.
This product has EHEDG certification.
SOLIDCL
alfalaval阿法拉伐卫生泵,LCP iCP 阿法拉伐泵 alfalaval卫生泵.
 
 
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!